Electrim mashing bin
CONTAINER – Finest polypropylene meeting EEC Plastic Food Container Regulations, suitable for use at temperatures up to 120°C (248°F).
LID – Special patent seal lid of high density polythene to ensure a liquid tight fit to container. Bored and fitted with 8mm diameter plastic grommet to take any standard glass or plastic airlock. The fold back rim allows easy removal.
CAPACITY – 25 Litres (approx. 5½ gallons), calibrated 10 to 25 litres in 5 litre increments.
DIMENSIONS – Height 39cms Bottom Diameter 30cms Top Diameter 37cms
WEIGHT – Approximately 2 kilos
TAP – Worldwide Dispensers Nylon Food Grade Drum Tap – complete with external food grade rubber sealing washer.
HEATER – 2.75 Kilowatt element: 240/250 Volt : Normal kettle type element fitting with external plastic screw collar, and complete with internal rubber sealing washer. The element has an integral safety cut-out for excessive temperatures which automatically resets when the temperature drops to an acceptable level.
HEAT CONTROL – A highly sensitive control unit mounted on to a flat metal heat sink, which is secured in close contact with the outside of the bucket by the element securing collar. Under ideal operating conditions (i.e. with a constant external temperature and freedom from air currents): the temperature control should be better than 1-2°C. Unlike a normal thermostat, which only cuts out the heating element when the preset temperature is reached. The control unit gives a continual on/off cycling, the off period time decreasing as the setting on the dial is increased towards 10. The control dial is calibrated 0 to 10 with ½ unit divisions, and for any fixed volume of liquid, a particular setting will give repeatable temperature control.
TEMPERATURE CONTROL RANGE - 75°F (24°C) Approx. to 212°F (100°C).
USES – Designed for all malt and cereal mashing, and the subsequent hop boiling process. Can also be used for short term fermentation provided the minimum temperature setting is satisfactory.
LID – Special patent seal lid of high density polythene to ensure a liquid tight fit to container. Bored and fitted with 8mm diameter plastic grommet to take any standard glass or plastic airlock. The fold back rim allows easy removal.
CAPACITY – 25 Litres (approx. 5½ gallons), calibrated 10 to 25 litres in 5 litre increments.
DIMENSIONS – Height 39cms Bottom Diameter 30cms Top Diameter 37cms
WEIGHT – Approximately 2 kilos
TAP – Worldwide Dispensers Nylon Food Grade Drum Tap – complete with external food grade rubber sealing washer.
HEATER – 2.75 Kilowatt element: 240/250 Volt : Normal kettle type element fitting with external plastic screw collar, and complete with internal rubber sealing washer. The element has an integral safety cut-out for excessive temperatures which automatically resets when the temperature drops to an acceptable level.
HEAT CONTROL – A highly sensitive control unit mounted on to a flat metal heat sink, which is secured in close contact with the outside of the bucket by the element securing collar. Under ideal operating conditions (i.e. with a constant external temperature and freedom from air currents): the temperature control should be better than 1-2°C. Unlike a normal thermostat, which only cuts out the heating element when the preset temperature is reached. The control unit gives a continual on/off cycling, the off period time decreasing as the setting on the dial is increased towards 10. The control dial is calibrated 0 to 10 with ½ unit divisions, and for any fixed volume of liquid, a particular setting will give repeatable temperature control.
TEMPERATURE CONTROL RANGE - 75°F (24°C) Approx. to 212°F (100°C).
USES – Designed for all malt and cereal mashing, and the subsequent hop boiling process. Can also be used for short term fermentation provided the minimum temperature setting is satisfactory.
| Description | Price (£) | QTY | |
| Electrim Mashing bin A quality Mashing Bin complete with thermostat. Made in England.
CONTAINER – Finest polypropylene meeting EEC Plastic Food Container Regulations, suitable for use at temperatures up to 120°C (248°F).
LID – Special patent seal lid of high density polythene to ensure a liquid tight fit to container. Bored and fitted with 8mm diameter plastic grommet to take any standard glass or plastic airlock. The fold back rim allows easy removal.
CAPACITY – 25 Litres (approx. 5½ gallons), calibrated 10 to 25 litres in 5 litre increments.
DIMENSIONS – Height 39cms Bottom Diameter 30cms Top Diameter 37cms
WEIGHT – Approximately 2 kilos
TAP – Worldwide Dispensers Nylon Food Grade Drum Tap – complete with external food grade rubber sealing washer.
HEATER – 2.75 Kilowatt element: 240/250 Volt : Normal kettle type element fitting with external plastic screw collar, and complete with internal rubber sealing washer. The element has an integral safety cut-out for excessive temperatures which automatically resets when the temperature drops to an acceptable level.
HEAT CONTROL – A highly sensitive control unit mounted on to a flat metal heat sink, which is secured in close contact with the outside of the bucket by the element securing collar. Under ideal operating conditions (i.e. with a constant external temperature and freedom from air currents): the temperature control should be better than 1-2°C. Unlike a normal thermostat, which only cuts out the heating element when the preset temperature is reached. The control unit gives a continual on/off cycling, the off period time decreasing as the setting on the dial is increased towards 10. The control dial is calibrated 0 to 10 with ½ unit divisions, and for any fixed volume of liquid, a particular setting will give repeatable temperature control.
TEMPERATURE CONTROL RANGE - 75°F (24°C) Approx. to 212°F (100°C).
USES – Designed for all malt and cereal mashing, and the subsequent hop boiling process. Can also be used for short term fermentation provided the minimum temperature setting is satisfactory.
| |||
| Price (£) | QTY | ||
| Electrim Mashing bin A quality Mashing Bin complete with thermostat. Made in England.
CONTAINER – Finest polypropylene meeting EEC Plastic Food Container Regulations, suitable for use at temperatures up to 120°C (248°F).
LID – Special patent seal lid of high density polythene to ensure a liquid tight fit to container. Bored and fitted with 8mm diameter plastic grommet to take any standard glass or plastic airlock. The fold back rim allows easy removal.
CAPACITY – 25 Litres (approx. 5½ gallons), calibrated 10 to 25 litres in 5 litre increments.
DIMENSIONS – Height 39cms Bottom Diameter 30cms Top Diameter 37cms
WEIGHT – Approximately 2 kilos
TAP – Worldwide Dispensers Nylon Food Grade Drum Tap – complete with external food grade rubber sealing washer.
HEATER – 2.75 Kilowatt element: 240/250 Volt : Normal kettle type element fitting with external plastic screw collar, and complete with internal rubber sealing washer. The element has an integral safety cut-out for excessive temperatures which automatically resets when the temperature drops to an acceptable level.
HEAT CONTROL – A highly sensitive control unit mounted on to a flat metal heat sink, which is secured in close contact with the outside of the bucket by the element securing collar. Under ideal operating conditions (i.e. with a constant external temperature and freedom from air currents): the temperature control should be better than 1-2°C. Unlike a normal thermostat, which only cuts out the heating element when the preset temperature is reached. The control unit gives a continual on/off cycling, the off period time decreasing as the setting on the dial is increased towards 10. The control dial is calibrated 0 to 10 with ½ unit divisions, and for any fixed volume of liquid, a particular setting will give repeatable temperature control.
TEMPERATURE CONTROL RANGE - 75°F (24°C) Approx. to 212°F (100°C).
USES – Designed for all malt and cereal mashing, and the subsequent hop boiling process. Can also be used for short term fermentation provided the minimum temperature setting is satisfactory.
| £90.00 | Add to Basket | |
| Add to Basket | |||
| replacement tap for Bruheat Mashing Bin. This is the same tap as fitted to the Bruheat and Electrim Mashing Bin. Able to withstand high temperatures. | |||
| Price (£) | QTY | ||
| replacement tap for Bruheat Mashing Bin. This is the same tap as fitted to the Bruheat and Electrim Mashing Bin. Able to withstand high temperatures. | £7.95 | Add to Basket | |
| Add to Basket | |||
| Mashing and Sparging Bag This is an optional extra from the Mashing bin. This has a draw string top and measures 115cm (dia) x 34cm (deep). Made from nylon/polyester. | |||
| Price (£) | QTY | ||
| Mashing and Sparging Bag This is an optional extra from the Mashing bin. This has a draw string top and measures 115cm (dia) x 34cm (deep). Made from nylon/polyester. | £7.95 | Add to Basket | |
| Add to Basket | |||
| Hop bag A muslin bag suitable for adding hops to your brew. Also suitable for oak chips in wine kits. | |||
| Price (£) | QTY | ||
| Hop bag A muslin bag suitable for adding hops to your brew. Also suitable for oak chips in wine kits. | £0.45 | Add to Basket | |
| Add to Basket | |||
| Replacement Element for Mashing Bin. A Replacement Element for the Mashing Bin. 220/240v 2750w. | |||
| Price (£) | QTY | ||
| Replacement Element for Mashing Bin. A Replacement Element for the Mashing Bin. 220/240v 2750w. | £25.95 | Add to Basket | |
| Add to Basket | |||